steve m
|
| posted on 6/7/11 at 08:35 PM |
|
|
My no plate is on the nose, and my MOT guy assures me it is perfectly legal
as no were in the MOT bible does it say the plate has to be vertical, all it does say is that it has to be readable while standing in front at about
20 metres
Steve
|
|
|
|
|
scutter
|
| posted on 6/7/11 at 08:53 PM |
|
|
Sorry to disagree Steve, but my Fav local copper used to love pointing this out to me.
From the 2001 No. 561
ROAD TRAFFIC
The Road Vehicles (Display of Registration Marks)
Regulations 2001
This paragraph requires the plate to be fixed—
(a) vertically or, where that is not reasonably practicable, in a position as close to the
vertical as is reasonably practicable.
I wasn't prepared to argue the T**s about having to make up a front mount. They also have to have a reflective background to the plate, which
counts out stick on plates.
Back to the question in hand, An undertray need not be visable.
Put 8-10 mph onto the top speed by fitting that simple piece of ali. and you can't see if from the rear.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
franky
|
| posted on 6/7/11 at 09:02 PM |
|
|
Awesome, might have to make my own version of that.
I've not got any bump steer issues.
I'm going to fit my plate on the front of the chassis right under the back of the nosecone.
[Edited on 6/7/11 by franky]
|
|
|
