tegwin
|
| posted on 4/8/08 at 11:03 AM |
|
|
Sharp edges of exhaust silencer.....SVA not happy
Another one of my fail points was the exhaust muffler...
Basically where it has been made there is a lip either end which is "sharp"...To get around this I clipped some plastic herringbone trim
over it....its been inplace long enough to get several heat cycles and it hasnt fallen off..
However, the examiner didnt think it was perminant enough so pulled it off...
What have other people used to put on such edges exposed to heat?
I was thinking of some chrome brake pipe(can you get that?) Split down the middle and then pressed onto the ends of the muffler box..
What have other people done to get around this problem?
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
|
|
speedyxjs
|
| posted on 4/8/08 at 11:19 AM |
|
|
Is there any way you can get an aftermarket tip like the ones you get from halfrauds?
They tend to have a rolled edge and are bolted on.
How long can i resist the temptation to drop a V8 in?
|
|
|
Mr Whippy
|
| posted on 4/8/08 at 11:21 AM |
|
|
plastic trim on a silencer?! you been drinking
just make a guard out of an old washing machine or some large mesh to keep his fingers away from it. Then chuck it once you've passed.
Fame is when your old car is plastered all over the internet
|
|
|
mad4x4
|
| posted on 4/8/08 at 11:23 AM |
|
|
Photo's would help of the offending edge
Scot's do it better in Kilts.
MK INDY's Don't Self Centre Regardless of MK Setting !
|
|
|
JohnN
|
| posted on 4/8/08 at 11:26 AM |
|
|
Speedyxjs, I think he's talking about the can, not the end of the pipe??
I think that if your can looks like one that would normally be under a car, ie it has standing edges at the ends, then your only option is, as you
suggest, to fit something over the "sharp" edges to bring the radii up to 3+mm
|
|
|
omega 24 v6
|
| posted on 4/8/08 at 11:32 AM |
|
|
get a piece of 5mm round s/steel rod and bend it round the edge. Stich weld in 5 places,
If it looks wrong it probably is wrong.
|
|
|
speedyxjs
|
| posted on 4/8/08 at 11:41 AM |
|
|
quote:
Originally posted by JohnN
Speedyxjs, I think he's talking about the can, not the end of the pipe??
That would make more sense
How long can i resist the temptation to drop a V8 in?
|
|
|
Marcus
|
| posted on 4/8/08 at 11:41 AM |
|
|
I araldited some split 8mm copper pipe to the offending edge and polished it to make it look pretty. SVA bloke seemed to like it. It's still on,
but I' passed caring what it looks like!!
Marcus
Because kits are for girls!!
|
|
|
tegwin
|
| posted on 4/8/08 at 11:58 AM |
|
|
I had thought about normal copper pipe with some polish..
Deffinatly fairly easy..
How did you go about splitting the pipe down the middle?
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
whitestu
|
| posted on 4/8/08 at 12:05 PM |
|
|
quote:
get a piece of 5mm round s/steel rod and bend it round the edge. Stich weld in 5 places
That's what I did and it passed.
|
|
|
omega 24 v6
|
| posted on 4/8/08 at 03:42 PM |
|
|
quote:
That's what I did and it passed.
Great minds think alike.
If it looks wrong it probably is wrong.
|
|
|
Macbeast
|
| posted on 4/8/08 at 07:49 PM |
|
|
Not done it yet, but this is the plan 
 
Stainless pet feeding bowl, about a pound.
Cut 48mm (in my case) hole in centre to snugly fit over pipe. Trim surplus at back to just fit over silencer body, leaving 4-6 tabs for rivet into
silencer.
Don't know if it'll work, but it's satisfactorily locost.
|
|
|
t.j.
|
| posted on 4/8/08 at 08:59 PM |
|
|
quote:
Originally posted by Macbeast
Not done it yet, but this is the plan
Stainless pet feeding bowl, about a pound.
Cut 48mm (in my case) hole in centre to snugly fit over pipe. Trim surplus at back to just fit over silencer body, leaving 4-6 tabs for rivet into
silencer.
Don't know if it'll work, but it's satisfactorily locost.
I feel sorry for the dog, which is drying out now? 
Good solution, I like the copper idea also.
Please feel free to correct my bad English, i'm still learning. Your Dutch is awfull! :-)
|
|
|
02GF74
|
| posted on 5/8/08 at 09:13 AM |
|
|
if I understand what you are sauyihng, this is your solution.
8 mm (or was is 10 mm?) aluminium tube curved into shape. A pair of nibblers from machine mart to slit the tube which you then put onto the can - and
yes, it does take a bit of time making the curved slit.
In fact I may have these still lying around somewhere that you can have.
 
trim on can
 
trim on can - side
|
|
|
