Stirls
|
| posted on 21/10/17 at 04:16 PM |
|
|
Weld in ball joint sleeve
Am looking at doing the lower ball joint with a push in or screw in ball joint but struggling to fine and weld on sleeves and ball joints.
Am going to do it from scratch have all the rose joints for the arms just struggling with the ball joints for the uprights am using the Mazda Mx5 ones
if that helps.
Thanks Paul
|
|
|
|
|
PorkChop
|
| posted on 21/10/17 at 05:33 PM |
|
|
What's wrong with using the standard MX5 joints? Pointless reinventing the wheel.
And if I've understood what you're trying to do, you don't want to put bending loads through screw threads e.g. rod ends if you can
help it.
|
|
|
coozer
|
| posted on 21/10/17 at 05:34 PM |
|
|
Nothing wrong with the standard bottom joint, just we it as is.
Then if needs be its simple to replace.
1972 V8 Jago
1980 Z750
|
|
|
