Mk2 Escort Quick Rack - Track / Tie Rod help
Hi All,
After some help and knowledge from your collective minds.
I was given a MK2 Escort 2.4 quick rack by a guy at work that had been modified for a VW project he was working on. The only modification was to the
rods to allow him to fit a different tyoe of TRE and extension. I was hoping I would be able to swap over the rods from my standard rack but
didn't realise until today that the inner rod ends are attached in a completely different manner on the quick rack. Add to that I have just
found one of the rods on my standard rack to be bent and I'm left without a useable rack, at present.
Problem with the quick rack is I have no idea what rods they are, whether they were purpose made or are from a different vehicle. I am also unable to
get any details of where it originally came from. So, anyone recognise this?
[img]
 
QuickRackRod
[/img]
Also, out of interest, does the ball joint section come apart and is there any method of adjustment for the movement in the balljoint?
Thanks in advance
Rich
[Edited on 11/9/12 by jamesbond007ltk]
[Edited on 11/9/12 by jamesbond007ltk]
|
