carlknight1982
|
| posted on 1/4/12 at 03:57 PM |
|
|
Pinto rocker box gaskets
Ok so i know there are two different types of rocker boxes with different sized sealing flanges, how do i tell which one i have so i can get a new
gasket.
Carl
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
|
|
jacko
|
| posted on 1/4/12 at 04:05 PM |
|
|
Put a photo up of your rocker
|
|
|
jacko
|
| posted on 1/4/12 at 04:11 PM |
|
|
Just had a look at my spare gasket and its in a
PAYEN gasket packet the no is CH865 and it measures 5/8 in wide 1/8 thick this it for a wide rocker
Jacko
|
|
|
carlknight1982
|
| posted on 1/4/12 at 04:13 PM |
|
|
got that in metric mate?
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
omega0684
|
| posted on 1/4/12 at 04:14 PM |
|
|
get some calipers, take your rocker cover off and measure the edge of the head, if i remember correctly you need the thin gasket if it measures about
9mm and the fatter gasket if it measures about 11/12mm.
I love Pinto's, even if i did get mine from P&O!
|
|
|
jacko
|
| posted on 1/4/12 at 04:15 PM |
|
|
 
Carbs on manifold
Come on how old are you
15mm x3mm = 5/8 x1/8 approx
|
|
|
carlknight1982
|
| posted on 1/4/12 at 04:18 PM |
|
|
30 lol
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
omega0684
|
| posted on 1/4/12 at 05:49 PM |
|
|
what part are you measuring? 30 is far too big, it'll be no more than 12mm (its the bit on the head the gasket sits - not the bit where the
screws go in)
I love Pinto's, even if i did get mine from P&O!
|
|
|
Macbeast
|
| posted on 1/4/12 at 06:02 PM |
|
|
30 is his age lol
I'm addicted to brake fluid, but I can stop anytime.
|
|
|
