Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Can you use flexi exhaust pipe from the manifold to the exhaust pipe ?
rich201283

posted on 27/5/04 at 10:27 AM Reply With Quote
Can you use flexi exhaust pipe from the manifold to the exhaust pipe ?

Can you use flexi exhaust pipe from the manifold to the exhaust pipe because my steering rod fouls the path of the exhause and it will be very tricky to make a downpipe up.
View User's Profile View All Posts By User U2U Member
Peteff

posted on 27/5/04 at 12:43 PM Reply With Quote
it will be very tricky to make a downpipe up

It'll be going the wrong way if it's a downpipe and you make it up. I think Mark Allanson used some in his front section, try a search.





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member
Mark Allanson

posted on 27/5/04 at 06:10 PM Reply With Quote
Got my flexible bits from the local factors, only £9.00 each Rescued attachment Exhaust2.jpg
Rescued attachment Exhaust2.jpg






If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation

View User's Profile Visit User's Homepage View All Posts By User U2U Member
stephen_gusterson

posted on 27/5/04 at 07:11 PM Reply With Quote
Mark
do they weld on? or clamp on?

I have some nasty convoluted crappy stuff running from my downpipes to exhaust proper - yours looks better.

do they come longer? and how flexy (hard to describe I know) are they?

atb

steve






View User's Profile E-Mail User View All Posts By User U2U Member
Mark Allanson

posted on 27/5/04 at 07:21 PM Reply With Quote
They come in various diameters and lengths, I welded (now there is a surprise!!), but your could clamp them just as easily Rescued attachment Flexies.JPG
Rescued attachment Flexies.JPG






If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation

View User's Profile Visit User's Homepage View All Posts By User U2U Member
JoelP

posted on 27/5/04 at 09:05 PM Reply With Quote
if my beastie fails its noise test i'll be needing some of this stuff, to extend the exhaust away from the engine and add an extra silencer.






View User's Profile View All Posts By User U2U Member
stephen_gusterson

posted on 27/5/04 at 10:20 PM Reply With Quote
thx mark






View User's Profile E-Mail User View All Posts By User U2U Member
Peteff

posted on 27/5/04 at 11:28 PM Reply With Quote
Cheers Steve.

. I used one of these to repair a Merc van exhaust, cut and shut weld job. They are available in various diameters but there is still a convoluted tube inside the mesh.

[Edited on 27/5/04 by Peteff]





yours, Pete

I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.