Dave Bailey
|
| posted on 15/6/09 at 07:22 PM |
|
|
What is this connector?
Anyone know what this connector is? I know I could use seperate bullet connectors but I would like to use the correct connector if possible....
 
res 2
thanks
Dave B
|
|
|
|
|
adithorp
|
| posted on 15/6/09 at 07:26 PM |
|
|
I managed to find the correct conerctors for everything on my car...except that one!
adrian
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
madrallysport
|
| posted on 15/6/09 at 07:33 PM |
|
|
Bring the cap to the local scrappy and see if you can find any thing on a standard loom tht will fit it
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
Mark G
|
| posted on 15/6/09 at 07:37 PM |
|
|
Or replace the cap with one from the scrappy and take the loom too.
Brake fluid reservoirs are all a universal fitting so any cap 'should' fit.
|
|
|
chris_smith
|
| posted on 15/6/09 at 07:44 PM |
|
|
Seat Alhambra,ford Galaxy VW Sharan possibly
The secret of success is to know something nobody else knows."
|
|
|
blakep82
|
| posted on 15/6/09 at 10:05 PM |
|
|
quote:
Originally posted by Mark G
Brake fluid reservoirs are all a universal fitting so any cap 'should' fit.
so should a cap off something like a ford fit on my wilwood ones? is the fitment as broad as that? caz that would be ver useful!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
chris_smith
|
| posted on 16/6/09 at 10:30 AM |
|
|
iv used an escort mk5/6 resevoir/cylinder that didnt come with a cap, ended up trying the one off my alhambra and it fit so i searched ebay and one
was available dirt cheap.
chris
The secret of success is to know something nobody else knows."
|
|
|
