Krismc
|
| posted on 12/4/09 at 07:44 PM |
|
|
SVA Fri 17th- Pics Attached!
Once over on my car please!
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0335.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0336.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0337.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0338.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0339.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0340.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0341.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0342.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0343.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0344.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0345.jpg
http://img.photobucket.com/albums/v136/kmcgough/VORTX%20PICTURES/CIMG0346.jpg
Cant get them small enough to post- Hand brake trim is to be complete, and suspension is to be adjusted.
i cant get the gap on the bonnet smaller- should be ok.
[Edited on 12/4/09 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
|
|
richardh
|
| posted on 12/4/09 at 07:50 PM |
|
|
pic 46 looks unfinished............
is that shut line on bodywork just a mistake?
fuel hose needs to be marked for use with fuel
looks tidy though
|
|
|
jacko
|
| posted on 12/4/09 at 07:51 PM |
|
|
Wire under dash ? can you push it up out of the way
|
|
|
handyandy
|
| posted on 12/4/09 at 07:55 PM |
|
|
very nice car, love the colour, what ral number is that colour? 
only things i can see that may need looking at are......
center of steering wheel,
bottom nuts on the fronts upright bolts & the thread/bolt thing at the base of the headlight anchor bolt.
very smart car
cheers andy
|
|
|
richardh
|
| posted on 12/4/09 at 07:56 PM |
|
|
ral 004 me thinks?????????????
|
|
|
Pdlewis
|
| posted on 12/4/09 at 08:00 PM |
|
|
Do you have a boot lid? if you dont i think they can radiouse test everything in there and itll fail
How come you have a gap on the bonnet fit?
Build Photo Album
Updated 05/02/2009
|
|
|
Krismc
|
| posted on 12/4/09 at 08:03 PM |
|
|
Pic 46- i need to Heat that up once suspension is set up 2mora.
Shut line is because the SVA cheat bar is fitted there for nose cone is further forward and i get a gap- that ok though for SVA??
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 12/4/09 at 08:03 PM |
|
|
RAL 2004
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
omega0684
|
| posted on 12/4/09 at 08:03 PM |
|
|
silencer looks to be hanging very low..........
Centre mirror also looks quite low, have you checked rear vision?
wire under the dash needs pushing up and cable tying out of the way,
your bonnet scoop has NO hole in it  ?
|
|
|
Krismc
|
| posted on 12/4/09 at 08:09 PM |
|
|
quote:
Originally posted by omega0684
silencer looks to be hanging very low..........
Centre mirror also looks quite low, have you checked rear vision?
wire under the dash needs pushing up and cable tying out of the way,
your bonnet scoop has NO hole in it ?
Bonnet scoop is more because the engine is too high in the bay, and the bonnet would not shut, so i cut a hole and the only way to cover it was a
scoop.
I might try and raise the center mirror, havent thought how to yet, i can see out but would be better higher.
Cable ill have a look.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
jambo
|
| posted on 12/4/09 at 08:31 PM |
|
|
cant see the safety washers on the front uprights are they on
ps is that mnr's scoop.
|
|
|
coozer
|
| posted on 12/4/09 at 08:40 PM |
|
|
Nice trailer, sure I've seen it somewhere else...
You in Monday? Popped in Saturday but no cars , no one in....
1972 V8 Jago
1980 Z750
|
|
|
flange nut
|
| posted on 12/4/09 at 10:43 PM |
|
|
Have you got a handbrake gaitor? In pic 339 it looks like there isn't one. What's the short piece of tube poking out underneath the
steering rack in the front views for?
Geoff
|
|
|
Krismc
|
| posted on 13/4/09 at 06:43 AM |
|
|
Steve was in all day sat, matty popped over and took the trailer and car to garage for fuel for 20mins- must have missed us.
Come over today, im going in garage now til bout 1230pm, then we going to take car and check MPH guage.
Tube on steering rack is heat shrink, ready to be ''shrunked''
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
wicket
|
| posted on 13/4/09 at 08:17 AM |
|
|
Is that wiring tie wrapped to the handbrake cable in pic 44, they may not like that.
|
|
|
mad-butcher
|
| posted on 13/4/09 at 08:55 AM |
|
|
That's not a jubilee clip on the fuel line in pic 44 is it , they won't like that if it is
under dash is checked with contactable sphere above a certain height ( mine failed on a contactable relay )
tony
|
|
|
Krismc
|
| posted on 13/4/09 at 05:14 PM |
|
|
Ive got jubilee clips on all my fuel lines?!? whats up with that, how else would i attach them?!
The black wire attached to the handbrake cable is the handbrake cable ends they go round the handbrake and back to the boot, so i tied them to
handbrake cable.
[Edited on 13/4/09 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
dave-69isit
|
| posted on 13/4/09 at 09:24 PM |
|
|
can not see any reflectors
|
|
|
wicket
|
| posted on 13/4/09 at 10:04 PM |
|
|
These are the type of clip that should be used for fuel hose.
 
Rescued attachment 000c_2.JPG
|
|
|
Krismc
|
| posted on 14/4/09 at 01:52 PM |
|
|
Erm well i got the with the kit from MNR, also when i bought some extra fuel hose from Halfords it came with jubilee clips.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Valtra
|
| posted on 15/4/09 at 10:42 PM |
|
|
jubilee clips (or similar ) were ok for me also
"If it looks like it works and it feels like it works, then it works"
|
|
|
Krismc
|
| posted on 16/4/09 at 02:59 PM |
|
|
Reflectors are on, final trim is on, car is 99.9% complete, im going to adjust bias bar now!! oh shit
[Edited on 16/4/09 by Krismc]
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
