sorens2
|
| posted on 2/4/09 at 12:35 PM |
|
|
How do I adjust my EWP controller (pic)
My temp is only 50-60 deg.
How does the EWP work and how do I adjust it properly ?
Soren S2
 
Rescued attachment ewp.JPG
|
|
|
|
|
matt_gsxr
|
| posted on 2/4/09 at 12:45 PM |
|
|
Here are some instructions
http://www.davi
escraig.com.au/Images/Categories/Switch%20&%20Controller%20Selection%20Guide%20&%20Tech%20Specs%202009.pdf
|
|
|
Mr Whippy
|
| posted on 2/4/09 at 01:40 PM |
|
|
ehem at the top it seems to say 'Temperature control' and there's a dial with hotter or colder, that might be it? 
that hose looks like its going to explode 
[Edited on 2/4/09 by Mr Whippy]
Fame is when your old car is plastered all over the internet
|
|
|
sorens2
|
| posted on 2/4/09 at 02:45 PM |
|
|
These instructions are for the new model. "Digital".
It´s not a hose blowing but a badly painted steering.....something.
I´m an electrician myself and have seen a gadget or two.
When I turn the little potmeter towards "hotter" it´s like......It´s not that much hotter running.
It was on the coldest setting.
Now it´s running 70 deg. when cruising @ 55 miles.
When I measure the voltage to the pump it says 13.8 V no matter what.
When it reaches 93 deg. the fan starts and shuts dow @ 85.
But when I start driving it drops to 70 ish.
Soren S2
|
|
|
