Board logo

Rear Reflectors
BKLOCO - 15/2/06 at 09:26 AM

I have been scouring the SVA manual for information regarding the rear reflectors and can find nothing regarding how large or small these should be. I'm not talking about thickness here or the minimum edge radius, I am referring to a minimum area.
Am I missing something or is there no regulation governing this?
The reason I ask is that my local motor factors have some small oval reflectors that I would like to use. They comply with min radius but are only about 25mm X 15mm.
Too small?


shortie - 15/2/06 at 09:30 AM

As far as I know there is no minimum area, MAC1 use very small ones and have passed SVA with them.

HTH,
Rich.


Deckman001 - 15/2/06 at 09:31 AM

I've gone for a relector similar to the size of the rear lights, (landrover type) I want the car to be seen if the lights are out
Not alot of help, sorry

Jason


DarrenW - 15/2/06 at 09:44 AM

quote:
Originally posted by Deckman001
I want the car to be seen if the lights are out
Not alot of help, sorry

Jason



he he he LOL - you will need a 6 foot pole with 20 flashing lights on the top then...... Its amazing when you get on the road how many people dont see you. In some ways you are more vulnerable than a bike. Ive started driving with at least my sidelights on at all times.


Humbug - 15/2/06 at 10:08 AM

Again - not sure if it helps, but are the motor factors ones the same as these:

http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=2005-10-23%201%20Locost%20rear.jpg

I went through SVA with square reflectors then fitted these afterwards. Not sure if they have/need e markings, though


BKLOCO - 15/2/06 at 10:33 AM

quote:
Originally posted by Humbug
Again - not sure if it helps, but are the motor factors ones the same as these:

http://www.locostbuilders.co.uk/photos.php?action=showphoto&photo=2005-10-23%201%20Locost%20rear.jpg

I went through SVA with square reflectors then fitted these afterwards. Not sure if they have/need e markings, though


Yep ther're the ones. Wasn't thinking of using 6 though.


bigrich - 15/2/06 at 11:21 PM

these are my mac#1 supplied reflectors which passed sva without comment


bigrich - 15/2/06 at 11:29 PM

sorry theres no photo. site dos,nt seem to let me attach or upload at the moment will keep trying


bigrich - 15/2/06 at 11:40 PM

at last soted i hope resized file Rescued attachment rear-reflectors.jpg
Rescued attachment rear-reflectors.jpg


BKLOCO - 16/2/06 at 05:20 AM

Did it pass with the clear lens stop and tail lights as well or were these fitted post SVA?


bigrich - 17/2/06 at 10:08 PM

apart from the number plate this is how it passed sva


jos - 18/2/06 at 05:44 PM

Mine passed sva with nearly exactly the same light & reflector arrangement except my number plate light is an up lighter, and Ive also got a reversing light.

They did have a good look at the intensity of the rear tail & stop lights which midly worried me on the day but werent commented on.


BKLOCO - 24/2/06 at 05:22 AM

My solution


Description Reflector
Description Reflector