hi,

just put some pre sva pictures in my archive so any feedback on the car would be much appreciated.

Thanks Tom

The bulb should be Ok.
Not sure about the half life logo though!

looks like another well screwed together car, good luck, should be on road for spring, weather permitting.

Those indicator extensions look nice.
The rest of the car looks good aswell. Have you got a date for the s.v.a. yet?

Andy

Possibly sharp edges on front suspension ride height adjuster nuts (mine are similar and failed)

Also dashboard radius looks less than 19mm but hard to tell.

That's all I could see. Rest is nice and tidy.

Best of luck.

HTH

Looks superb!!!.

only thing could see is your front brake flexi's, are they secured to stop them catching anything on full lock?.

Ray

got date for sva Tuesday 28th march as requested 8.00 am
thanks for comments on car, i will look at covering ride height adjuster nuts
dashboard radius was achieved by 19mm dia aluminium tube. do you think that this will be ok?
desperately looking for a trailer to borrow/hire for sva any one got any ideas where i could get one

hi ray
the flexis are not secured at the top but have tried on full lock and the hoses dont catch or foul anything so hoping it will be ok.

What about the height on your headlights, i put my headlight bar on top of the chassis for that reason.
Nice colour set up, appears to be a popular choice nowadays.
Good Luck
Richard

good shout about the headlights just been out and checked. sh*t they are to low by 25mm i"ll try adjusting the shocks to lift the ride height if not looks like remounting

micks trailers on stoneferry has a car trailer he hires out,was pretty cheap too, but it gets booked up quick.

Ray

Hi Tim - Tom the cars looking good no bonnet off photos? . Did you get the timing set ok Graham