right then i have the standard top wish bones froom mk and i want to be able to adjust the camber more easily than having to remove the hub and turn it that way. The reason for this is i do a lot of track days and road work as well but i run it ma lot lower on track so altering it every time before and after is becoming a real pain in the arse. Im sure somone m,ust have ttried/done this before any suggestions would be greatly appreciated.
cheers rob

These should do the job.

http://www.gtscougar.freeserve.co.uk/mkindy.htm





[Edited on 19/05/04 by PAUL FISHER]

Or a pair of these,and modify your own wishbones?

http://www.gtstuning.co.uk/
Rescued attachment camber-adj xxxxxxxxxxxx.jpg

just what im after many thanks mr fisher

the camber adjusters do you just drill out the thread on the top of the wishbone or am i been thick. anyone done this and if so how much work is involved. or is it better to get them ready done for you, not get any access to a piller drill so it would be in my garage by eye.