r1_pete
|
| posted on 21/1/08 at 03:24 PM |
|
|
Bike carb rubber mountings.
Has anyone glued the rubbers to the manifold rather than using clips? on many bikes they're bonded to metal, wondered if anyone had tried, what
you used, what success?
P.S. The samco hose is temporary I've bought Mocol fuel filler hose for the final install..
 
Rescued attachment carbs1.jpg
|
|
|
|
|
paulf
|
| posted on 21/1/08 at 03:28 PM |
|
|
I would use narrow jubilee clips , theres not much suitable for gluing rubber that is both fuel and heat resistant.I would imagine the commercialy
made items are vulcanised together.
Paul.
|
|
|
jacko
|
| posted on 21/1/08 at 03:32 PM |
|
|
I glued the rubber pipe to the carbs + narrow clips i used supper glue been ok for 3 years
Jacko
|
|
|
Confused but excited.
|
| posted on 21/1/08 at 05:59 PM |
|
|
"supper glue" is that melted cheese? 
Tell them about the bent treacle edges!
|
|
|
.jpg)
