lsdweb
|
| posted on 17/1/08 at 03:51 PM |
|
|
20 degree hose bends
Hi All
I need a couple of 20 degree hose bends (32mm id). Any ideas? Everywhere I've looked only do 45's. I'd be happy with 22.5 degree
(half of 45) bends if there is such a thing!
Regards
Wyn
|
|
|
|
|
coozer
|
| posted on 17/1/08 at 03:56 PM |
|
|
Local scrap yard? Tons of hoses on the scrap motors.
1972 V8 Jago
1980 Z750
|
|
|
02GF74
|
| posted on 17/1/08 at 04:52 PM |
|
|
45, 90 and 135 is all I have seen; you cannot persuade a striaght hose then?
|
|
|
stevebubs
|
| posted on 17/1/08 at 05:17 PM |
|
|
Could you not get a piece of stainless/ aluminium pipe bent to the right shape and join that to your existing pipework using silicon joiners?
Taking a step further - can you get stainless exhaust pipe that is the right angle?
[Edited on 17/1/08 by stevebubs]
|
|
|
StevieB
|
| posted on 17/1/08 at 05:21 PM |
|
|
How about a bit of superflex?
|
|
|
wicket
|
| posted on 17/1/08 at 05:23 PM |
|
|
Do you have a local company that has mandrel pipe forming equipment.
Had mine done by local company for cash while I waited, with prior arrangement.
|
|
|
nick205
|
| posted on 17/1/08 at 05:27 PM |
|
|
someone like Merlin Motorsport @ Castle Coombe or Car Builder Solutions could probably bend and bead a bit of ally tube for you.
Alternatively I have a tame motor factor who is happy to let me look through his shelves and books for parts to suit rather than spneding ages going
through loads of part numbers with me - always worth asking!
|
|
|
lsdweb
|
| posted on 17/1/08 at 06:12 PM |
|
|
Space is a bit tight for an ali bend! Superflex might do it. I also have a bundle of old hoses and could try some offcuts of those.
 
Rescued attachment SNV30450.JPG
|
|
|
snippy
|
| posted on 17/1/08 at 07:15 PM |
|
|
Have a look at Quinton hazell hose RH1812, its off a metro. That looks like it has a section with 2 bends you could cut off and use? There`s one on
ebay for £4.99, item no - 300191108549. This hose is 32mm and used on many zetec engined kits.
|
|
|
lsdweb
|
| posted on 17/1/08 at 07:35 PM |
|
|
Thanks snippy - that looks good!
|
|
|
RazMan
|
| posted on 17/1/08 at 08:33 PM |
|
|
You could try looking through your local Gates agent catalogue. They have illustrations of every hose listed in bore sizes - very handy for my odd
hoses.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
lsdweb
|
| posted on 17/1/08 at 09:30 PM |
|
|
Thanks guys
I've bought the Metro part off eBay but managed to get it finished using bits form my box of spare ali and rubber hoses.
Wyn
|
|
|
