goodguydrew
|
| posted on 24/1/07 at 09:56 PM |
|
|
Luego engine mount rubbers
Are these the right rubbers for Luego crossflow engine mounts?
http://cgi.ebay.co.uk/LANDROVER-V8-4-CYL-TDI-ENGINE-MOUNTS-PAIR_W0QQitemZ180011067311QQihZ008QQcategoryZ31348QQrdZ1QQssPageNameZWD1VQQcmdZViewItem#eba
yphotohosting
Thanks
|
|
|
|
|
wicket
|
| posted on 24/1/07 at 10:12 PM |
|
|
Same sizes as mine which came from the original Luego Sportscars
|
|
|
goodguydrew
|
| posted on 24/1/07 at 10:16 PM |
|
|
Thank you Wicket.
(That's a lovely car you have built.  )
|
|
|
Danozeman
|
| posted on 25/1/07 at 06:58 AM |
|
|
Alot of people use these rubbers...
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
|
simes43
|
| posted on 25/1/07 at 10:12 AM |
|
|
To stop the engine moving around, and to avoid the problems of the rubber perishing I use polyurethane doughnuts.
This also allowed me to have complete control of the engines height and bay position.
You need to keep an eye on nuts and bolts
[Edited on 25/1/07 by simes43]
|
|
|
Syd Bridge
|
| posted on 25/1/07 at 10:24 AM |
|
|
I'm using TVR suspension bushes in polyurethane, to make my custom racecar mounts. Well worth considering. Well, maybe.
Cheers,
Syd.
|
|
|
jollygreengiant
|
| posted on 25/1/07 at 05:03 PM |
|
|
I shall be using these. Got them from my local factors. Quinten Hazel EM670.
£8.27 inc VAT for the pair.
 
Rescued attachment 25012007.jpg
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
trogdor
|
| posted on 26/1/07 at 09:54 AM |
|
|
just to let you know i used that ebay shop to buy 5 of those mounts,
don't bother with the auction unless ur only getting a pair i guess, i rang up and got 5 sent. they arrived the next day all for £20
didn't think that was too bad, guy was pretty helpful on the phone too, would highly recommend them
[Edited on 26/1/07 by trogdor]
|
|
|
