Mark Allanson
|
| posted on 2/2/03 at 09:49 PM |
|
|
Sump Modification Variation
I've now got my 2.0I engine out of the sorry remains of the Sierra I was given (thanks Dave!!), Degreased it, steam cleaned it, taken all the
ancilliaries off it and took a deep breath and looked at the sump.
The sump looks like it has just completed the Paris-Dakar rally after spending 5 years at the bottom of the seabed.
I have two options, get a RS2000 sump (I am a tight fisted bas#ard, so that is out!) or to shorten it as per RHOCAR.
I got an idea (everyone groans and says "oh, no, not another one). As the locost aint got no front subframe, why cant I put the capacity extension
forward (i.e. the sump being the same depth over its full length) instead of a box thingy stuck on the side?
It seems the natural thing to do instead of making a little box and welding it on the side - am I missing something, or is this a viable idea?
|
|
|
|
|
Viper
|
| posted on 2/2/03 at 09:52 PM |
|
|
that will work, just make sure you baffle the sump and you should have no probs...
have fun
|
|
|
CairB
|
| posted on 2/2/03 at 10:08 PM |
|
|
Mark,
I did something similar, I used the chopped off part of the sump and reweleded it at the front. I will need to park the car on a hill when changing
oil though. On the road and no problems yet. I believe an option may be a Granada sump, I only heard about it after modding mine and not looked any
further into it.
I've posted picis in Photos - Cairb - Pinto sump mods 1 & 2.
Cheers,
Colin
|
|
|
Mark Allanson
|
| posted on 2/2/03 at 10:14 PM |
|
|
What advantage is the Granny Sump? Presumable shorter with the same capacity?
|
|
|
Mark Allanson
|
| posted on 2/2/03 at 10:19 PM |
|
|
What I was thinking was something like this
 
Rescued attachment Sump Mod CairB.jpeg
|
|
|
locodude
|
| posted on 3/2/03 at 07:22 PM |
|
|
It's what I've done with my 1600 x-flow sump and it's whay MK do with Pinto sumps. Make sure it has an adequate baffle though to prevent surge
under braking. There is a detailed 'how-to' on chrisg's website.
|
|
|
Mark Allanson
|
| posted on 8/2/03 at 07:18 PM |
|
|
There, I did it!
 
Rescued attachment DCP_0539Sump.jpg
|
|
|
Mark Allanson
|
| posted on 8/2/03 at 07:24 PM |
|
|
I have left the lower part of the sump intact (with a few holes to aid oil recirculation), the oil capacity is now probably about 15 pints, but this
should aid cooling.
I havent put a baffle in yet, will I need one with this set up?
 
Rescued attachment DCP_0537SumpInner.jpg
|
|
|
