BKLOCO
|
| posted on 5/10/05 at 09:04 PM |
|
|
Home Built Plenum
Here are some pics of my latest project.
I deceided to manufacture my own Plenum and mate it with a cut down & modified 1600 Escort Zetec injection manifold.
The eventual aim is to fuel the thing with an Omex ECU.
I rolled the plenum from 3mm ally and welded it to a 12mm ally plate that has been gas flowed into the manifold
 
Description plenum off car 1
 
Description plenum on car 1
Experience is what you get when you don't get what you want!!! 
|
|
|
|
|
Winston Todge
|
| posted on 5/10/05 at 09:32 PM |
|
|
Looks awesome BKLOCO!
Great bit of fab work.. 
Is ally TIG welding really an artwork compared to MIG steel?
Chris.
|
|
|
BKLOCO
|
| posted on 5/10/05 at 09:37 PM |
|
|
Not "artwork" pure skill. LOL
Actually it's just practice same as anything else.
Plus I am an engineer by trade!!! Therefore have access to some very nice kit.
Experience is what you get when you don't get what you want!!!
|
|
|
dl_peabody
|
| posted on 6/10/05 at 03:52 AM |
|
|
IF you got access to good kit you can build good skills and get great results.
IF you have no access to good kit your skills suffer and your results are MUCH worse.
Nice plenuim by the way..I had to review it a couple times looks NICE. Very slick...
[Edited on 6/10/05 by dl_peabody]
|
|
|
.jpg)
