sammini7
|
| posted on 25/4/20 at 04:18 PM |
|
|
Exhaust Box recommendation ???
Hi everybody I am looking for an exhaust silencer box 500m box length 2.5/2.75" inlet and and a nice rolled exit.
Any suggestions?
[url=https://imgur.com/9izDvz5]
|
|
|
|
|
big_wasa
|
| posted on 25/4/20 at 05:26 PM |
|
|
Have you Thought about a universal silencer and adding the bits you want ? Around £50 with dozens of size options.
Or places like Wunoff do some really nice ones but expect to pay £££
Made mine up last weekend
eBay Item
[Edited on 25/4/20 by big_wasa]
|
|
|
BigGeoff
|
| posted on 7/5/20 at 12:37 PM |
|
|
Hi big_wasa
Exhaust looks good - this is one of my next jobs whilst on furlough. Any chance you can do a couple of photos of the exhaust hangars/connections to
the body ?
Cheers
Geoff
|
|
|
FamilyGuy
|
| posted on 7/5/20 at 04:29 PM |
|
|
SP Engineering do some nice cans with rolled tips. Mine also came with a removable baffle to quiet it down a bit and rubber lined clip to mount it.
|
|
|
SJ
|
| posted on 7/5/20 at 04:34 PM |
|
|
Is that a Zetec with the exhaust coming out on the driver's side? The can looks very small - how noisy is it?
[Edited on 7/5/20 by SJ]
|
|
|
big_wasa
|
| posted on 7/5/20 at 06:51 PM |
|
|
Looks more like a MeV rocket style car with exhaust out the back.
My exhaust hangers aren’t finished but I will get some pics over the week end
|
|
|
FamilyGuy
|
| posted on 7/5/20 at 06:54 PM |
|
|
Its rear engine with the exhaust out the back. I think the length of the main can section is 380mm. It is quite noisy without the baffle, which I
like. How noisy exactly I font know as I haven't measured it. I know of another zetec build with the same can and similar setup which passed IVA
ok with the baffle. Hoping mine will be ok too.
|
|
|
40inches
|
| posted on 8/5/20 at 08:36 AM |
|
|
£50 silencer, the biggest I could fit, I bolted 4mm strip under the chassis front and back and used 2 rubber mounts on the back and 1 on the front.
 
Description
 
Description
|
|
|
