Plunky
|
| posted on 15/3/17 at 05:29 PM |
|
|
Exhaust quotation
Hi all,
I am looking to replace a section of the exhaust on my F27. It is the section between the manifold and silencer.
The current setup comprises of some very messy connectors and it blows a lot!
I have included a picture below of what it looks like now.
My plan is to replace the exhaust section from just before the lambda boss to the start of the silencer box with a new piece of pipe and have once
connection in this pipe using a v-band connecter.
My question is, firstly what are your opinions on my plan and secondly, how much do you think this would cost? I have already been to a local exhaust
specialist and been quoted £150.
|
|
|
|
|
CosKev3
|
| posted on 15/3/17 at 06:23 PM |
|
|
IMO £150 is expensive.
Hoping that included the pipe/V-band kit?
To someone doing exhausts all the time I would say that's a hours work to sort.
|
|
|
gremlin1234
|
| posted on 15/3/17 at 06:25 PM |
|
|
quote:
Exhaust quotation
[joke]"Brrruooom Brroom"[/joke]
|
|
|
Plunky
|
| posted on 15/3/17 at 06:36 PM |
|
|
quote:
Originally posted by CosKev3
IMO £150 is expensive.
Hoping that included the pipe/V-band kit?
To someone doing exhausts all the time I would say that's a hours work to sort.
It does include materials, however I did think it was a tad on the expensive side.
Like you say, perhaps an hours work, no more than £40-50 in materials so £100 for labour seems steep!
|
|
|
r1_pete
|
| posted on 15/3/17 at 06:40 PM |
|
|
Your plan seems sound.
As for £150, I dont think its far off the mark:
Remove manifold and existing system,
Cut the duff section out
Rough up the replacement section
Refit manifold and system,
Make fine adjustments.
Tack up.
Remove and seam weld.
Clean up and refit with new gaskets etc.
|
|
|
Plunky
|
| posted on 15/3/17 at 06:43 PM |
|
|
quote:
Originally posted by r1_pete
Your plan seems sound.
As for £150, I dont think its far off the mark:
Remove manifold and existing system,
Cut the duff section out
Rough up the replacement section
Refit manifold and system,
Make fine adjustments.
Tack up.
Remove and seam weld.
Clean up and refit with new gaskets etc.
Putting it like that... perhaps £150 isn't too bad then
|
|
|
CosKev3
|
| posted on 15/3/17 at 07:20 PM |
|
|
From looking at the pic I don't think manifold would need to come off.
And I bet if you ask the exhaust place they haven't quoted to remove it 
|
|
|
mark chandler
|
| posted on 15/3/17 at 09:15 PM |
|
|
£150 to replace 9" of tube....
I,ll do it for £100, is it 2"" stainless ?
|
|
|
owelly
|
| posted on 16/3/17 at 12:04 AM |
|
|
Just move the silencer forward......
http://www.ppcmag.co.uk
|
|
|
907
|
| posted on 16/3/17 at 07:52 AM |
|
|
quote:
Originally posted by owelly
Just move the silencer forward......
 
We need a "like" button
|
|
|
