Porsche 944 V8 Progress
I finally started making some progress on the 944 V8 Conversion.
I've machined a 944 flywheel to fit an RV8 auto flex plate carrier.
turned up a spigot bearing adapter.
Made up the 12mm Adapter plate.
A couple of pics of it all fitted together to a spare 944 bellhousing / Torque Tube, the clutch works fine, when disengaged the shaft and friction
plate spin nice and freely, so I'm sure everything is nicely centred.
I'll post some pics of the internals when I take it to pieces.
Next step is engine mounts and sump....
 
V8 to 944 TT 1
 
V8 to 944 TT 2
 
V8 to 944 TT 3
|
