Jmg
|
| posted on 27/1/16 at 11:26 AM |
|
|
zx12r egr mod
anyone blanked off their egr off on their Kawasaki zx12r engine?
had any troubles?
|
|
|
|
|
MikeRJ
|
| posted on 27/1/16 at 11:48 AM |
|
|
I'm pretty sure the ZX12R doesn't have any kind of exhaust gas recirculation, do you mean the secondary air injection (also known as PAIR,
though this is Suzuki's acronym for their own system)? Secondary air injection is the opposite of EGR, i.e. it injects air into the exhaust
rather than exhaust gas into the inlet air.
Blanking off the PAIR valves is a very common mod, usually to prevent popping on the overrun when an after-market exhaust is fitted. You also need to
blank them if you fit an oxygen sensor into the exhaust. Blanking them will not affect the fuel mapping, and won't give any measurable change
in power.
|
|
|
INDY BIRD
|
| posted on 27/1/16 at 12:06 PM |
|
|
do you mean like this on the rocker cover ?
 
spire gtr zx12r engine
|
|
|
Jmg
|
| posted on 27/1/16 at 12:43 PM |
|
|
I don't know much about these engines only just bought one for my car, I was looking at bike adverts and they called it a egr mod.
Yes the two bits on the rocker cover
|
|
|
INDY BIRD
|
| posted on 27/1/16 at 12:51 PM |
|
|
yeah blank them off, you have to really to tune it if your running a power commander or it gives false readings on the AFR as its for emisisions
really thats what its for,
|
|
|
Jmg
|
| posted on 27/1/16 at 02:11 PM |
|
|
Can't run power command im my racing
|
|
|
