TrophyJem
|
| posted on 28/1/14 at 12:38 PM |
|
|
Duratec plumbing
Does anybody have a nice diagram of how I need to plumb a Duratec?
Preferably with a heater.
Cheers
|
|
|
|
|
deeceee09
|
| posted on 28/1/14 at 02:47 PM |
|
|
Does this help?
http://www.uphillracers.com/showthread.php/fiesta-duratec-saloon-libre-2786p32.html?highlight=cooling+duratec
Treachery and old age will always triumph over youthful enthusiasm.
|
|
|
big-vee-twin
|
| posted on 28/1/14 at 04:47 PM |
|
|
This is how I have done mine I also have a heater plumbed up.
[img]
 
Description
[/img]
Heater is connected across the connection marked as blanked off and teed into the header tank return.
[Edited on 28/1/14 by big-vee-twin]
Duratec Engine is fitted, MS2 Extra V3 is assembled and tested, engine running, car now built. IVA passed 26/02/2016
http://www.triangleltd.com
|
|
|
peter030371
|
| posted on 28/1/14 at 05:49 PM |
|
|
or this http://duratec.wikispaces.com/modification-CosworthOilCooler with a St150 oil cooler fitted 
|
|
|
TrophyJem
|
| posted on 29/1/14 at 09:24 AM |
|
|
That should point me in the right direction.
Cheers
|
|
|
