carlknight1982
|
| posted on 14/11/12 at 06:14 PM |
|
|
Is a st170 sump the same as a zetec?
What sump will fit the st engine in rwd
I seem to recall someone selling steel do it yourself sumps for the zetec can anyone point me in the right direction?
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
|
|
monck
|
| posted on 14/11/12 at 07:39 PM |
|
|
Pretty sure it is go on ebay type in st170 sump and then find a blacktop zetec one look identical to me
|
|
|
scutter
|
| posted on 14/11/12 at 09:35 PM |
|
|
I swapped my blacktop one straight onto my ST. they are idential bottom ends.
ATB Dan.
The less I worked, the more i liked it.
|
|
|
carlknight1982
|
| posted on 15/11/12 at 01:30 PM |
|
|
Was that a standard blacktop sump and did you have any height issues?
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
emwmarine
|
| posted on 15/11/12 at 02:57 PM |
|
|
quote:
Originally posted by carlknight1982
Was that a standard blacktop sump and did you have any height issues?
http://www.zetecinside.com/xr2/stepbystep1.shtml#step2
This is what you need.
Building a Dax Rush.
|
|
|
scutter
|
| posted on 15/11/12 at 03:30 PM |
|
|
quote:
Originally posted by carlknight1982
Was that a standard blacktop sump and did you have any height issues?
I had to chop my Blacktop sump, I don't think it would have fitted a stand book car, but mines got an inch added to the engine bay so it cleared
with 5-8mm.
 
Zetec sump 2
ATB Dan.
The less I worked, the more i liked it.
|
|
|
tims31
|
| posted on 15/11/12 at 05:05 PM |
|
|
Exactly the same as I did with mine Dan, haven't had mine running yet but should be ok I hope. Have you had any problems with the amount of oil
in the system Dan?
Look at my build diary link below for how to do it.
[Edited on 15/11/12 by tims31]
[Edited on 15/11/12 by tims31]
Build: http://www.martinsfurybuild.co.uk/
|
|
|
