Yazza54
|
| posted on 12/3/11 at 01:18 PM |
|
|
Could anyone make me a air duct?
Helllooooooo
The air duct I currently have on my fury exits down instead of straight out which means I have a long winding length of duct to my px600 airbox...
If I could get a duct with straight exit into te box I think itd work better and at least look neater. I can't find one of the dimensions I need
though to fit under the bonnet bulge..so was wondering if anyone on here could make one? Preferably carbon unless it's going to cost a fortune
then ally would be fine.
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
|
|
welderman
|
| posted on 12/3/11 at 01:36 PM |
|
|
box
Forum Code:
 
airbox
Thank's, Joe 
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
welderman
|
| posted on 12/3/11 at 01:37 PM |
|
|
Not sure it would fit as your water header is in a different spot
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Yazza54
|
| posted on 12/3/11 at 01:46 PM |
|
|
The airbox setup all works fine I just want a duct the size as the one i already have but with back exit to go straight to the airbox. Can't
find one as it's not a STD size, it's a Ferrari 360 challenge brake duct I bought which just happened to fit.
I know the ram air effect isnt much on a car but you can't be getting any with an open filter just attached to an airbox?
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
austin man
|
| posted on 12/3/11 at 02:53 PM |
|
|
need fresh air coming in just for the cooling factor, neve fancied drawin air in from down low as I ave come across a coulpe of cars that thought they
where wet and dry vacs when the hit a deep puddle. Both engines totally fubbared due to bent rods
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
Yazza54
|
| posted on 12/3/11 at 03:01 PM |
|
|
quote:
Originally posted by austin man
need fresh air coming in just for the cooling factor, neve fancied drawin air in from down low as I ave come across a coulpe of cars that thought they
where wet and dry vacs when the hit a deep puddle. Both engines totally fubbared due to bent rods
It is high up but the exit is at 90 degrees down hence the duct going from the box, under the cross member and up to the duct outlet
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
tul214
|
| posted on 12/3/11 at 03:04 PM |
|
|
You need something like Yella Terra Over The Radiator Cold Air Intake Commodore on eBay (end time 08-Apr-11 11:30:56
BST)
[Edited on 12/3/11 by tul214]
1.6 Raw Super6 sold
|
|
|
Yazza54
|
| posted on 12/3/11 at 03:07 PM |
|
|
Well that's what I already have but the exit is down. It's the black thing on top of the rad. It works fine I just want a straighter and
shorter duct
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
Yazza54
|
| posted on 12/3/11 at 03:10 PM |
|
|
Maybe I've not explained myself very well. I just need this but In my own dimensions
http://www.demon-tweeks.co.uk/Performance/Brakes/Brake_Ducts_Ducting/Revotec_Rectangular_Intake_Duct/864/0/40427
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
LBMEFM
|
| posted on 12/3/11 at 04:12 PM |
|
|
quote:
Originally posted by tul214
You need something like Yella Terra Over The Radiator Cold Air Intake Commodore on eBay (end time 08-Apr-11 11:30:56
BST)
Whoooooooooooooooo Have you seen the price
|
|
|
welderman
|
| posted on 12/3/11 at 05:05 PM |
|
|
Ah. Think I could knock something up.
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
40inches
|
| posted on 12/3/11 at 05:58 PM |
|
|
quote:
Originally posted by Yazza54
Maybe I've not explained myself very well. I just need this but In my own dimensions
http://www.demon-tweeks.co.uk/Performance/Brakes/Brake_Ducts_Ducting/Revotec_Rectangular_Intake_Duct/864/0/40427
What are your dimensions?
|
|
|
Yazza54
|
| posted on 12/3/11 at 06:06 PM |
|
|
quote:
Originally posted by 40inches
quote:
Originally posted by Yazza54
Maybe I've not explained myself very well. I just need this but In my own dimensions
http://www.demon-tweeks.co.uk/Performance/Brakes/Brake_Ducts_Ducting/Revotec_Rectangular_Intake_Duct/864/0/40427
What are your dimensions?
200 x 50 rectangular inlet tapering to 75 outlet about 200 long in total
There's ducts that are close but it needs to be those dims to fit snugly under the bonnet bulge on top of the rad. Most of the ones I've
seen are 51mm outlets too which is too small ad I don't want to be faffing with adapters.
P.s thanks welderman I've relplied to the yooo2yoo!
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
indykid
|
| posted on 12/3/11 at 06:30 PM |
|
|
Glad you got there in the end
Since that one suits your needs, couldn't you cut the back of the duct off, then bend the wire in the hose into a rectangular shape to match?
It wouldn't need to be perfect and with some tidy duct tape, would look perfectly respectable.
|
|
|
adithorp
|
| posted on 12/3/11 at 07:11 PM |
|
|
quote:
Originally posted by indykid
Glad you got there in the end
Since that one suits your needs, couldn't you cut the back of the duct off, then bend the wire in the hose into a rectangular shape to match?
It wouldn't need to be perfect and with some tidy duct tape, would look perfectly respectable.
Thats what I was about to write.
"A witty saying proves nothing" Voltaire
http://jpsc.org.uk/forum/
|
|
|
Yazza54
|
| posted on 12/3/11 at 07:18 PM |
|
|
Hmm I want it to look like it was made to do the job
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
indykid
|
| posted on 12/3/11 at 07:25 PM |
|
|
That's down to your fabrication skills I guess. It shouldn't be hard to make a good job of it though
|
|
|
welderman
|
| posted on 14/3/11 at 03:40 PM |
|
|
I know its paper but this is what your after i think, with a 75mm bit of tube on the end.
 
[/img]
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Yazza54
|
| posted on 15/3/11 at 04:50 PM |
|
|
Yep! How long is that or is it just as an example?
Btw thanks for the u2u totally missed the post
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
welderman
|
| posted on 15/3/11 at 06:45 PM |
|
|
Sample but it's approx 250mm long
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
Yazza54
|
| posted on 15/3/11 at 07:18 PM |
|
|
Would have to be 200mm long to have enough room to fit the pipe but apart from that it'll work. So 75mm pipe, duct 200 long with 200x50 opening.
Sound doable? Thanks for this!
I'm unhappy cos I eat and I eat cos I'm unhappy
|
|
|
welderman
|
| posted on 15/3/11 at 08:28 PM |
|
|
Yep
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
:{THC}:YosamiteSam
|
| posted on 16/3/11 at 11:57 AM |
|
|
you could join the 2 together with either heatshrink [if you can find some big enuff] or thin wall rubber pipe thats very flexible - held in place
with tie wraps
|
|
|
welderman
|
| posted on 16/3/11 at 01:29 PM |
|
|
duct 200mm long
[img]
[/img]
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
welderman
|
| posted on 16/3/11 at 01:30 PM |
|
|
duct 150mm long
[img]
[/img]
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
|
.jpg)
