The Baron
|
posted on 2/12/09 at 04:56 PM |
|
|
Zetec to Pinto ~ Starter Motors.
This is the last part (i bet it wont be) that i need to source for my winter project to replace my pinto engine.
I know the usual starter is a lucas lrs707, but several articals also state that a starter from a Diesel Escort can be used when using a Type 9
gearbox.
Does anyone know the model number of the one which fits, there seems to loads of cheap ones on ebay, but which one?
Cheers in Advance,
B
Spot the mistake in the title???
should be Pinto to Zetec
[Edited on 2/12/09 by The Baron]
[Edited on 2/12/09 by The Baron]
|
|
|
austin man
|
posted on 2/12/09 at 05:16 PM |
|
|
I m aware that the following can be used Pinto starter with a 14mm spacer plate, 1.8 CVH or 2.00 DOHC starter (sierra and Granada for the DOHC)
Remember water pump needs changing if the engines out of a mondeo as they rotate in the opposite directionand the sump needs modding where the
starter is as it fouls
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
coozer
|
posted on 2/12/09 at 05:49 PM |
|
|
DOHC starter on mine, NO sump mods for the silvertop, few ribs ground off a blacktop sump.
An idler is easier to install than spending the cash on a new water pump (unless you want to)
Heres the label on the side of my starter....
Rescued attachment DOHC Starter.jpg
1972 V8 Jago
1980 Z750
|
|
norfolkluego
|
posted on 2/12/09 at 07:43 PM |
|
|
Sump mods before/after
Rescued attachment sump1.jpg
|
|
norfolkluego
|
posted on 2/12/09 at 07:44 PM |
|
|
With thanks to Numb nuts, his engine/garage
Rescued attachment sump2.jpg
|
|
norfolkluego
|
posted on 2/12/09 at 07:45 PM |
|
|
PS the shiney one is after
|
|
austin man
|
posted on 2/12/09 at 10:38 PM |
|
|
is the black top sump a direct replacement for the silvertop one ?? I retained my alloy sum had it shortened and modified to clear the starter.
What is the cost of the black top sumps
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|