flak monkey
|
| posted on 8/9/09 at 06:41 PM |
|
|
Euroquip M12 ends?
Do euroquip make m12x1 ends for their dash 3 hose?
The saab clutch cylinder seems to have the ports tapped m12.
Whatever happened to the m10x1 std? 
Sera
http://www.motosera.com
|
|
|
|
|
tomgregory2000
|
| posted on 8/9/09 at 08:02 PM |
|
|
flack which slave cylinder do you have?
i have one of these fitted in mine and have goodridge fittings on the end so it must be m10 or 3/8"
click me
|
|
|
flak monkey
|
| posted on 8/9/09 at 08:04 PM |
|
|
Its one of these:
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=350244871780
Your link doesnt work?
Sera
http://www.motosera.com
|
|
|
tomgregory2000
|
| posted on 8/9/09 at 08:15 PM |
|
|
my link was to a saab 900 one as well but from euro car parts, odd :s
|
|
|
tomgregory2000
|
| posted on 8/9/09 at 08:32 PM |
|
|
i was being a div and i have some adaptors fitted into mine
Here is a pic
 
hydraulic slave
|
|
|
russbost
|
| posted on 9/9/09 at 07:19 AM |
|
|
David, I doubt you'll find an M12 end for - 03 hose, but you can certainly get a 12mm banjo, is that an alternative? You would obviously also
need to find a banjo bolt with the correct thread, I believe thread may be 1.25, 1.5 or 1.75 pitch - certainly at least 2 of those variants are used
on VW, Honda & Harley
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
