snapper
|
| posted on 18/6/09 at 06:12 PM |
|
|
VR sensor mounting on a Pinto
The on going saga of my Pinto motor has lead me to buy a running spare so i won't be off the road for long, the spare will be fitted with bits
off the current 2.1 heavy breathing, oil spewing rough running dog while i build a third based on the 205 block from a Transit, this will have mostly
new bits except for sump, steel light flywheel, carbs and exhuast.
The VR sensor bracket on my current engine is mounted to low so i want to put it in a better position on the Transit block.
Show me your (Megajolt) VR sensor mounting positions gentlemen
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
|
|
omega0684
|
| posted on 18/6/09 at 06:15 PM |
|
|
mine is mounted in the 4 o'clock position, when looking at the engine from the front
|
|
|
RichardK
|
| posted on 18/6/09 at 06:15 PM |
|
|
This how I've done mine.
Cheers
Rich
Gallery updated 11/01/2011
|
|
|
jpindy3
|
| posted on 18/6/09 at 07:57 PM |
|
|
iv done the same as above but my one starts from the altenator holes and comes round and i have a bolt like above has to steady it,il grt a pic tomoz
|
|
|
DarrenW
|
| posted on 19/6/09 at 09:29 AM |
|
|
Mine is almost identical to RichardK's but with a different bracket.
Only pain is changing the alternator belt, but doesnt need doing too often thankfully.
|
|
|
jpindy3
|
| posted on 19/6/09 at 07:21 PM |
|
|
://locostbuilders.co.uk/upload/m_SUC50065.jpg[/img]
 
vr sensor braket
 
Description
[Edited on 19/6/09 by jpindy3]
[Edited on 19/6/09 by jpindy3]
|
|
|
dave r
|
| posted on 19/6/09 at 08:39 PM |
|
|
paul, come and find me on the rhocar club stand, and i will show you mine ... fnarr fnarr
dave
|
|
|
