rb968
|
| posted on 2/3/09 at 11:13 PM |
|
|
Bike can attachment
OK if I go for a standard zx9r bike can and it has the three studs on the end as below how does it attach to the exhaust? Is it just a push on fit or
would I need a flange to fit on the three studs? Sorry might be a stupid question!
Rich
 
zx9r can 3stud
|
|
|
|
|
Paul TigerB6
|
| posted on 2/3/09 at 11:15 PM |
|
|
Do you have the front part of the can and pipe to go with that? Cut it off short and go from there?
ie
this part here
[Edited on 2/3/09 by Paul TigerB6]
|
|
|
rb968
|
| posted on 2/3/09 at 11:22 PM |
|
|
Ah no, considering a std can to use on an exhaust planning to have made up from one I have already. Does the std exhaust attach to the three stud then
with that round plate/flange and a pipe pushed into the hole?
Cheers
|
|
|
rb968
|
| posted on 2/3/09 at 11:31 PM |
|
|
One of these ?
 
3studflange
|
|
|
Snap-off
|
| posted on 3/3/09 at 07:08 AM |
|
|
Something like this will do the job.
slip on adaptor
|
|
|
ReMan
|
| posted on 3/3/09 at 07:17 AM |
|
|
Wot he said^^^^^^^^^^
Works a trat, I used it to fit a Bandit, (very quiet) can, then cut it to make a stubby(very loud version last year.
Good cheap track can I recon
 
Rescued attachment IMG_0032s.JPG
|
|
|
rb968
|
| posted on 3/3/09 at 07:25 PM |
|
|
Thanks guys. Can probably get that made up in my friendly machine shop and welder at work.
Cheers.
Rich
|
|
|
