cjtheman
|
posted on 24/2/09 at 06:51 AM |
|
|
which rad fan
hi all as above
what rad fans are you all using on 1.3 crossflow
it needs to be small
would it work with a bike rad as anybody used one
cheers
colin
wanted
sunny weather
sva pass 12/6/09
taxed 16/6/09
|
|
|
Hellfire
|
posted on 24/2/09 at 08:58 AM |
|
|
PLenty use the Bike Fan with Bike Rad's but that's not what you're asking.
I don't know anyone using a Bike Fan on a conventional Car Rad.
Not many use 1.3 Crossflow but I cant see a problem why a bike fan would not work.
The only restriction in the nose cone - even though our's is an Indy we used a Micra Fan and Rad but some use Polo's. (they're crap
as a Rad/Fan but they taste nice - before some wise arse comments!!! )
Steve
|
|
Danozeman
|
posted on 24/2/09 at 09:27 AM |
|
|
Have you got a rad yet? if so what?
Iv got a polo rad and pacet 11 inch fan. Keeps my zetec temp down nicely.
[Edited on 24/2/09 by Danozeman]
Dan
Built the purple peril!! Let the modifications begin!!
http://www.eastangliankitcars.co.uk
|
|
l0rd
|
posted on 24/2/09 at 10:21 AM |
|
|
Would a fan from a diesel be ok?
|
|
paulf
|
posted on 24/2/09 at 09:00 PM |
|
|
I have a polo rad with a fireblade fan and find it works ok.I did have 2 fans fitted but one packed up, I removed it to repair last winter and never
got around to it, so ran last sumer with just the one with no problems.
Paul.
|
|
bjohnson
|
posted on 25/2/09 at 03:24 PM |
|
|
Try here for fans www.spalautomotive.co.uk
|
|
paulf
|
posted on 25/2/09 at 05:16 PM |
|
|
Pics of fans.
Rescued attachment DSCF0054.JPG
|
|
richard
|
posted on 25/2/09 at 06:33 PM |
|
|
We used a cross flow radiator and fiesta rad fan on 2.0 litre pinto in the mock up stage, when we come to the final build we found the rad was leaking
so we had it recored and decided to upgrade to capri size core. the fan keeps it cool fine but maybe draws a bit too much current. Theres a picture in
my archieve labelled final engine shot thats shows ours, but a bit large.
|
|
SPYDER
|
posted on 25/2/09 at 08:59 PM |
|
|
quote:
...I don't know anyone using a Bike Fan on a conventional Car Rad...
We are using TWO Aprilia RSV fans on a Polo rad on our Phoenix.
They're made by SPAL and are as cheap as chips and very effective for the size.
Geoff
|
|