oil started p!ssing out from this bad boy here :
eh?
What on earth is it? what is its purpose?
and why cant i seem to screw the little c*nt back in? argh its one of those nights!
nath
thought i was bleeding the cooling system then thought it was a good idea to turn the key,
oil started p!ssing out from this bad boy here :
eh?
What on earth is it? what is its purpose?
and why cant i seem to screw the little c*nt back in? argh its one of those nights!
nath
bigger picture chap ?
it looks like a blanking plug for the oil gallery.
don't know why it wont go back in unless it was staked in to start with and it needs a tap running down the thread to clean it up before
replacing the plug
cheers
Mark
Oil gallery plug??
in red circle just above insert for thermo housing
Its the end of the oilway that feeds the exhaust camshaft bearings.Maybe the threads are damaged , i would remove it completely and check threads in
the head are not crossthreaded, if they are you will need to retap it and clean out the oilways
Paul.
quote:
Originally posted by nathanharris1987
eh?
What on earth is it? what is its purpose?
nath
