Those of you with bike carbs would you please show me photos of the way you have connected the cable to the bike carbs.
I have Pinto engine to R1 carbs. Do i use a Sierra cable, do i need springs etc?
Ta
Steve.

Just used a good quality mountain bike brake cable on my ZX9R carbs

i used a replacement motorbike cable as picture in my archive 'air box'




[Edited on 24/6/08 by will121]

This might help though the carbs are different, i found caable ties to be a good friend at this point to keep it in position.

The pic mightbe a bit big but i thought this would be best so it was easier to see what was going on!!

ok, the pics not as big as i thought it was going to be! still you get the idea

PS as these carbs are different the throttle cable is the one going down into the carbs.

The cable going across the length of the carbs is the choke

[Edited on 24/6/08 by iscmatt]

hi, i got a bmx brake cable of ebay and done this picyures below:

1


2


3


stuart

[Edited on 24/6/08 by Stuart_B]

Stuart, thats the sort of thing im after