Hi all,
After a recent purchase, from a member (many thanks) see below
I fancy tuning it a bit, so has anyone got any xflow performance parts about they want to sell? steel rocker posts, roller rockers? uprated oil
pumps, steel pulleys?
naturally cash waiting. many thanks
New Engine
.
OT alert! 
That rocker cover looks well funky. Apparently there is a market for exotic Ford rocker covers.some like then integral Piper fetch as much as 300
quid! 
I have for sale an unused stage 3 head,
used manifolds, DCOE 40s, fixed vac advance dizzy with luminition, dry sump rocker cover, and a non-dry sump rocker cover (But your one is cooler
than mine.) and some other gubbings now i'm going zetec.
quote:
Originally posted by Fatgadget
OT alert!
That rocker cover looks well funky. Apparently there is a market for exotic Ford rocker covers.some like then integral Piper fetch as much as 300 quid!
I;ve got a stainless manifold for bike carbs if your interested?
Ray
I put a Piper BP285 cam on ebay on sunday, new but been stored a while with a very low reserve
Thats interesting amount of stuff!!
I suspect I'll be in touch in the near future.
Many thanks
Neil
quote:
Originally posted by Dave Ashurst
In the garage I've got some stuff. Some that I can't remember but some that I can:
Good bits:
2 or 3 used high pressure oil pumps (routinely replaced at each rebuild or upgrade but I kept the used ones because they work).
Lightweight steel flywheel and twin plate sintered racing clutch (that needs new plates) plates are ~£90 each before you make any rash decisions!
Pair of boxed, new, unused K&N 60mm filters for DCOE carbs.
a half decent modified big valve cylinder head off a hillclimb mallock. (that engine is currently being rebuilt with full race head so this one is surplus)
Stainless steel, used big bore 4-1 competition exhaust manifold (from a westfield SEi wide) - nice, and recently purchased, but it clashes with the chassis diagonal on my book locost (doh!). I'm too tired to start chopping anything. Hence - surplus I guess.
Sorry, I just parted with 4 DCOE 40 carbs 3 weeks ago.
Broken things:
a complete, plate-type LSD (english axle type) with broken cover plate - in bits in a plastic bucket.
The 4.1:1 cwp and diff casing that the lsd goes with. Actually that's not broken at all.
type 2 gt gearbox - in bits, in a plastic bucket & ripe for renovation (thrust bearing worn).
Drop me a line if you want to pop round and have a look, make me a fair offer etc.
I should probably put these and other stuff on ebay and tidy the garage.
rgds
Dave