hi does anyone know where i can get a cheap hose joiner with a threaded part on side for take off

or a reducing t-piece to fit 32mm hose down to fit 15mm hose

or even a self sealing take off to fit 32mm hose

need to get me expansion tank plumbing in right all the ones ive found from the usual are either too big or too expensive

regards

mark

plumbers merchants will do the later. Solder up what you need. what sort of threade take off? Oil feed or pressure sender maybe ? Give us some more info on this please

Try Car builder solutions, ( google them) they can make bits up if you phone then and there usually a good price

AllyFab sorted me out with a custom made T-Piece (32mm with 15mm angled T) for £14 + postage (Picked mine up from him at Stoneleigh). Nice guy to deal with.
By the way Stainless Vacuum cleaner extension pipe is 32mm & available off ebay dirt cheap. Chromed steel clothes rails are 25mm & lots of ally tube at B&Q. Get inventive

I'll 2nd Car Builder Solutions

They sell exactly what you're after off the shelf no more than £15 delivered IIRC.

thanks guys its just a take off to go back to the expansion tank as at the moment i have the tank plumbed in at the water pump so the tank fills up when you put some high revs on. will give car builders a ring is there a web site for the ally fad people

regards

mark

AllyFab

thanks getting one made seem quite good thanks guys

Here's one (of several) that CBS made for me. Very reasonable and good quality.
Rescued attachment Heater tee.jpg

got one now made out of stainless will do the job