Are these the right rubbers for Luego crossflow engine mounts?

http://cgi.ebay.co.uk/LANDROVER-V8-4-CYL-TDI-ENGINE-MOUNTS-PAIR_W0QQitemZ180011067311QQihZ008QQcategoryZ31348QQrdZ1QQssPageNameZWD1VQQcmdZViewItem#eba yphotohosting

Thanks

Same sizes as mine which came from the original Luego Sportscars

Thank you Wicket.
(That's a lovely car you have built. )

Alot of people use these rubbers...

To stop the engine moving around, and to avoid the problems of the rubber perishing I use polyurethane doughnuts.

This also allowed me to have complete control of the engines height and bay position.

You need to keep an eye on nuts and bolts

[Edited on 25/1/07 by simes43]

I'm using TVR suspension bushes in polyurethane, to make my custom racecar mounts. Well worth considering. Well, maybe.

Cheers,
Syd.

I shall be using these. Got them from my local factors. Quinten Hazel EM670.

£8.27 inc VAT for the pair.
Rescued attachment 25012007.jpg

just to let you know i used that ebay shop to buy 5 of those mounts,

don't bother with the auction unless ur only getting a pair i guess, i rang up and got 5 sent. they arrived the next day all for £20

didn't think that was too bad, guy was pretty helpful on the phone too, would highly recommend them

[Edited on 26/1/07 by trogdor]