Has anyone got a bosch part number for a pinto starter motor to suit a 2 litre pinto with a T9 box? I have got a starter motor but its in bits, and I am not sure if it has come from an automatic engine or a manual and would like a basis for comparison.

I assume that all starter motors for T9 transmission 2 litre pinto sierras are the same? If so I might be able to get one from a scrappy.

Cheers,
David

My starter is off a 2.0 Pinto inj ('97)

will have a look tonight to see what part numbers are on it.....

EDIT:. Off Manual Sierra with Type9 Gearbox

[Edited on 15/8/06 by DaveFJ]

The starters for manual and automatic are different handed - the manual fits on the passenger side and the auto on the drivers side

With the above info it should be obvious which one you have.

Cheers

Mark

I will check tonight, but I may have a pinto starter knocking around you can have for nowt. It came offf the engine that was attached to your gearbox.
Hows the build going?
Adam

Cheers Adam.

Let me know if you find it.

Thanks for all the other info gents

i've got one spare off my 1.6 pinto donor. Its a QH part with a paper sticker on it that cant be read.
Is it the same as a 2.0L? Sure some one will tell me.
Rescued attachment Pinto starter small.JPG

quote:

---

Originally posted by coozer
i've got one spare off my 1.6 pinto donor. Its a QH part with a paper sticker on it that cant be read.
Is it the same as a 2.0L? Sure some one will tell me.

---

Hi,
Just found the starter, if you want it U2U me.
Cheers
Adam