Board logo

Zetec alt bracket
Danozeman - 12/5/06 at 05:40 PM

Arternoon chaps.

Im after a nice zetec alt bracket for the little charade alt. Wheres the best place to get one from? I cant be bothered to make one.

I have a nice ally one but it doesnt let the alt clear me carbs and manifold.

Krismc - 12/5/06 at 05:42 PM

can i have the ali one then?!??!?

Danozeman - 12/5/06 at 05:46 PM

I will let you know on that one...


I was looking at the westie one but 80 quid for a couple of brackets seems a lot to me..

lsdweb - 12/5/06 at 06:07 PM

Tiger do one but it's not the nicest made piece of kit!

piddy - 12/5/06 at 06:25 PM

Hi Dan.
I would try Mac#1.
Mark made me a bracket for mine to fit the micra alternator for £30.

givemethebighammer - 12/5/06 at 06:26 PM

the bracket is not that hard to knock up

my bracket was made to design as per sierts site:

http://home.tiscali.nl/~svos/alternator.html

plate 130 x 91 mm and 5 mm thick
lugs 30x 35mm 10mm thick Rescued attachment bracket.jpg
Rescued attachment bracket.jpg

givemethebighammer - 12/5/06 at 06:27 PM

This may also be of interest

Krismc - 12/5/06 at 09:04 PM

quote:

Tiger do one but it's not the nicest made piece of kit!


i have one from the robbing ba$t*rd's, they told me it would be perfect for my black top!!!

when i got it no holes lined up and the alternator doesnt fit in to it properly, when i told them i wanted to return it i was basically told to bugger off as its not in it original packet (which was a plastic bag)

THEIVES




mark @ mac1 seems to know his stuff and ive had loads of reccomendations for him, so give him a try

[Edited on 12/5/06 by Krismc]

lsdweb - 13/5/06 at 09:10 AM

Krismc

I had a similar response from Tiger !!

Wyn