I bought my Valencia distributor from a fellow Locostbuilder, it looks the right one but the plug & wiring on it is nothing like described elswhere on here, reading on here there should be a black wire (live) a brown wire (earth) & a green wire (coil -ve), the plug supplied has a Brown,a brown/green & a brown/black,see picture.
the supplied plug also does not have the rubber weather seal that most have,

would it be possible for someone with this type of distributor to pull back the rubber weather seal & tell me which pins the black brown & green wires go to, the ignition module is numbered 1,2 & 3 from the top in the picture.

I'd be very greatful & be a friend forever

thanks all in advance
Rescued attachment DSCN1692.JPG

It's probably no help, but you have the Bosch module, most are Lucas.

Marcus

Was looking through my old paperwork and found a scrap of paper for Fiesta 2 with following :-

1 = Neg side of coil
2 = Earth
3 = +12v side of coil.

thanks Rob, Thats brilliant