HI

Can you tell me which are the best bike carbs to use on a pinto

The Yamaha r1 carbs seem very popular at the moment ,41mm bore I believe ,but they do angle down a lot ,and may stick out of the bonnet.

I have used the Suzuki GSXR 38mm carbs on my CVH the have a nice shallow mounting angle.

Suzuki Bandit carbs are a similar angle too...........
Rescued attachment Carbs On Car 6 vvvsml.jpg

Any over 38mm I measured my R1's at 40mm but I may be wrong they are from a 98 spec????????
I also have a set of Blackbird carbs that are 42mm which are beter/cleaner and best of all cheaper than the R1's.....
It seems that having bike carbs will meen putting the filter through the bonnet , but im no were near that stage yet....

Been given this site about bike carbs etc.

http://www.mnrltd.co.uk/Engines.html

I used Bogg Bro's see my previous posts for details.....
added a pic of the cbr 1100 xx carbs

Thank you all
I will go for the black bird cards and Bogg Bro's for the mainfold.

does anyone know if ZX6R carbs are any good as i have a good set doing nothing.

Are they 36mm?????????????????????
Should be ok on a smaller motor?????

I'm not sure of the chokes size,i'll have to check.