Probably a simple one but could anyone tell me where the engine number is on SOHC Pinto 2.0

Cheers

Under the exhaust manifold and at the back of the altenator

Carl

cheers i'll have a wander out to the garage and get

Cheers

Does OHM6015 B-A sound about right?

That sounds like block markings to me.

The engine number is on a flatened piece of block in the position mentioned earlier,mine is two letters and five numbers and are stamped on.
The letters and numbers stamped are about 6mm in height and the flatened area is roughly about 25mm in height and 80mm long.

There might well be a pic of an engine number in a haynes manual if you have one just to give you a guide of the area to look in.

my engine number stamped area is above the numbers you quoted earlier,as in this pic
Rescued attachment MK Indy build pics 087.jpg

you can just see the numbers in this one above the block marking numbers
Rescued attachment MK Indy build pics 144.jpg

Took a bit of uncovering had to rub off my nice new paint but got it two letters and 5 numbers.

Thanks for all the info and pics

no problem,sometimes a bit of chalk along the numbers helps to read them