Board logo

What size fan for my polo radiator ?
Andybarbet - 29/9/14 at 08:44 PM

I have a polo radiator & was wondering which size fan do most people use ?

If I measure the radiator top to bottom, a 10 inch fan would seem the best way to go.

Ideally I would like a 'puller' so that I can mount it behind the radiator.

Also, any advice on the best fan for the job or are the £24 eBay cheap'os fine ?

Cheers - Andy


Ben_Copeland - 29/9/14 at 08:51 PM

Cheap ones don't push/pull nearly as much air as a proper one. You can always tell the difference between peoples cars. The more expensive ones are faster and switch off much quicker than my cheap ebay ones.


tims31 - 29/9/14 at 10:12 PM

I Bought a 12" 120w one for mine (VW303) Polo Rad, works fine and good quality. Dont get the 80w version


Stoney Racing on Ebay

[Edited on 29/9/14 by tims31]

[Edited on 29/9/14 by tims31]


SPYDER - 29/9/14 at 11:20 PM

We used a pair of SPAL 5" fans as used on Aprilia superbikes on our Phoenix. Paid £10 for one and £8 for the other.



whitestu - 30/9/14 at 07:04 AM

I re-used the old Sierra fan on mine.


renetom - 30/9/14 at 09:00 AM

We used a polo fan, cheap as chips, reversible, easy to mount
Got ours on fleabay around £4. perfect.


simonrh - 30/9/14 at 11:42 AM

I have an 11" spal fitted to mine just fits.


Andybarbet - 30/9/14 at 12:16 PM

Cheers for the reply, I might look out for a polo one then, it hadn't crossed my mind !

It might be a better option, especially if it has a cowling etc to bolt straight onto the lugs on my polo rad, nice & simple.

If not, I'm liking the idea of the bike fans too, that mount looks very nice on yours spyder.

[Edited on 30/9/14 by Andybarbet]


johnemms - 30/9/14 at 12:50 PM

Got one for a tenner from scrappy - chopped it to fit my polo - 2 speed as well all good never a problem..
VW Gti Rad Fans & new core
VW Gti Rad Fans & new core

polo rad vw gti  fittings
polo rad vw gti fittings


Andybarbet - 30/9/14 at 04:59 PM

I'm going to check on my Saab 95, im going to break the whole car so of it will fit I will use it on the kit build :-)