hi peeps im after some advice on remote mounting my oil filter im after a kit that will allow me to run a remote filter oil cooler and two sensors for a k series engine im nt sure how this sort of thing works just that i dont have room for a filter in the stock position due to the starter being in the way now

Oil Cooler Kit 15 Row Filter Relocation Kit ROVER | eBay

Hi

Can you get away with a shorter oil filter?

A photo would help!

Wyn

note enough room especially if i decide to use a oil cooler

I run mine in the V made by the 2 front shock braces at the front of chassis. It's mounted on a brace running between 2 loom points. It's just tucked behind the nose duct.


rad duct 03

ATB Dan.

The K Series has a bolt on oil filter housing - there may be an adaptor to bolt direct to the block to relocate the filter - Think AUto may be able to help

W

Hi, I'm currently installing a K series into my 1958 Austin A35.
I've got to relocate the oil filter and have had a friend machine up an adapter plate.
He's willing to make additional ones up if your interested.

[url=http://www2.mgcars.org.uk/cgi-bin/gen5?runprog=mgbbs&access=71493101907008&mode=imgdis&ifile=2|76_0_71493101907008_1342448991.jpg][/u rl]