Good evening everyone,

Started to look at making a connection between throttle pedal and the ZX6 Carbs and
there is no simple way of locating the cable outer.

Is there something missing?


carbs_throttle_connection

Any comments / pictures greatly received.

Thanks,

Len.

yes, from memory theres a plate that bolts onto the mounting above the choke plunger in the pic

Yes a bracket missing,sits about 2"above the throttle linkage

Another pic of the bracket from the side

Thanks,

That explains why the top screw was not tight!

Any ideas where I can get one from?

Len.

Edit for double post,you could make a bracket,only needs one cable holder just copy the shape of the ones pictured,failing that eBay or bike breakers online?

[Edited on 31/1/12 by lewis]

Thanks Lewis,

Looks like my next job is a bit of intricate metal work

Len

I may have one you can have I will look in the garage for you, give me an hour

Steve

[Edited on 31/1/12 by stevec]

Thanks Steve,

I will be patient.

Len.

I found these three, you are welcome to any of them you may be able to adapt one.
Steve.

Hi Steve,

U2U sent

Len.

[Edited on 31/1/12 by avagolen]

I've only just seen this thread, so sorry if its too late, but I have a rotten set of ZX6R that I use for spares. That very bracket is available if you'd like?

Hi Deezee,

Yes please. Save me some work.

U2U sent.

Len.