Hi guys,

Can anyone help me out with the pipe connections on my Pinto inlet manifold???

Which are coolant, vacuum etc....

Cheers for any advice
Rescued attachment P1000560.JPG

hi nick
from left to right
coolant inlet
crank case vent
vacuum for servo
hope this helps

Thanks Speedthing - I can get on with plumbing it all in now!

Presumably I can connect the crankcase breather on the block directly to the manifold?
Or does it need some kind of oil seperator?

Cheers again

Nick

nick
pipe connects to the p.c.v valve and then pushes into the breather on the block


[Edited on 16/7/04 by speedthing]