Seem like a good deal.

Universal High Quality Aluminum Oil Catch Can Tank Blac on eBay (end time 10-Dec-10 07:51:12 GMT)

Awaiting ali drink bottle reply for a pound..

Bear in mind its size ........... its width is 2 1/4" or 56mm & height is 5.1" or 12.5cm. Total volume is just over 300ml, or less than a can of coke.

Its a little bit tiny - although i suspect big enough if your car doesn't breath much and you keep your eye on it.

quote:

---

Originally posted by Bluemoon
Awaiting ali drink bottle reply for a pound..

---

Agreed. I go by the thinking that catch tanks shouldn't cost you anything!

FYI, the MSA suggest that a catch tank should be at least 2litres. I've managed to over fill one at that size too! (don't ask )

[Edited on 1/12/10 by andylancaster3000]

That is absolutely tiny, it would be waste of time fitting it to anything that actually needed it.

ive used header tanks i the past with good success .

I'm using a Boddingtons can.

Neil

I use a old oil spray gun can And the best bit is you can take the lid off and wipe the old scummy oil out

-------!!------
Jacko