anyone have any pics of starter motor installed and before and after pics of the mods required to the block/sump ...im a bit unsure of what needs to be done
cheers

whicc
h zetec silvertop or blacktop and do you have the correct starter ie off the 1.8 CVH sierra or 2l dohc

black top with a starter unipartGXE4711

sorry cant help I could have if it was the silvertop

I fitted a lightened 1.8 silvertop flywheel redrilled to take a Pinto clutch cover from Dunnel and a 1.8 CVH starter.

its just the mods associated with a standard blacktop im looking at

have a look in my photos , in the engine section.
[Edited on 3/11/10 by dunk3]

[Edited on 3/11/10 by dunk3]

Description

[Edited on 3/11/10 by dunk3]
Image deleted by owner

[Edited on 3/11/10 by dunk3]

Take a look in my archive under engine, pictures of a modded blacktop sump, and a silvertop sump fitted to the blacktop.

Is it 1.8 or 2.00 litre.
Cheers,
Bob

This is how much I took off to suit the DOHC starter...





[Edited on 3/11/10 by coozer]

2.0 litre