Board logo

quaife reverse box
Blackbird Rush - 13/4/10 at 09:06 PM

Is there a particular way round that the reverse box has to go?

Seen it fitted either way round.....

[Edited on 13/4/10 by Blackbird Rush]

Blackbird Rush - 13/4/10 at 09:08 PM

quote:
Originally posted by mangogrooveworkshop
are you wanting to go backwards


??

Davg - 13/4/10 at 09:09 PM

Reverse light switch to passenger side.

Blackbird Rush - 13/4/10 at 09:10 PM

quote:
Originally posted by Davg
Reverse light switch to passenger side.


Cool , this is the way round i have it.

bmarlow - 14/4/10 at 06:00 PM

Does this picture help. The box is fitted to a DAX Rush MC. Rescued attachment 90_reverse_box_fitted.jpg
Rescued attachment 90_reverse_box_fitted.jpg

Blackbird Rush - 14/4/10 at 09:21 PM

quote:
Originally posted by bmarlow
Does this picture help. The box is fitted to a DAX Rush MC.


Thought i recognised the photo as its from my car!

Took the dash, seats & tunnel out las night to have a nose, there is oil in it and its still in 1 piece! loads of backlash though but there always was...

[Edited on 14/4/10 by Blackbird Rush]

bmarlow - 19/4/10 at 08:01 PM

Where did you get the bolts securing the mounting plate and what size/length. Dax have supplied me with threaded rods and nuts, but I would prefer a bolt.

bmarlow - 21/4/10 at 06:57 PM

Hi all, has anyone mounted this box in a DAX Rush MC using bolts to secure the mounting plate to the chassis?

Blackbird Rush - 22/4/10 at 01:20 PM

Brian,

Pic above is of my install, and as dax supplied, the plate the box sits on was tapped for the bolts you see.

Ash