Board logo

Duratec oil in and out holes?
FASTdan - 10/1/10 at 09:19 AM

Which one is which? We're doing a remote filter DIY style, which one is nearest the bellhousing?

Stuart_B - 10/1/10 at 10:19 AM

hi dan, i the one nearest to the bellhousing is out. one nearest to the front of the engine is in, to the filter as it comes from the pump.

cheers

stuart

[Edited on 10/1/10 by Stuart_B]

FASTdan - 10/1/10 at 10:30 PM

quote:
Originally posted by Stuart_B
hi dan, i the one nearest to the bellhousing is out. one nearest to the front of the engine is in, to the filter as it comes from the pump.

cheers

stuart

[Edited on 10/1/10 by Stuart_B]


So just to clarify, the one nearest the bellhousing is out of the filter and in to the block?

flak monkey - 11/1/10 at 08:29 AM

Hole nearest bellhousing if the filter oulet (i.e. is the feed to the block)

The hole furthest from the bellhousing is the feed from the pump (i.e the inlet to the filter).

Micael - 6/7/10 at 09:09 PM

Hi guys

is this what you mean?
(the arrow indicates oil flow)

[Edited on 6/7/10 by Micael] Rescued attachment duaoil.jpg
Rescued attachment duaoil.jpg

FASTdan - 7/7/10 at 07:07 AM

quote:
Originally posted by Micael
Hi guys

is this what you mean?
(the arrow indicates oil flow)

[Edited on 6/7/10 by Micael]


No, opposite way around

Micael - 7/7/10 at 07:49 AM

Lol

Thanks