Do euroquip make m12x1 ends for their dash 3 hose?

The saab clutch cylinder seems to have the ports tapped m12.

Whatever happened to the m10x1 std?

flack which slave cylinder do you have?
i have one of these fitted in mine and have goodridge fittings on the end so it must be m10 or 3/8"
click me

Its one of these:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=350244871780

Your link doesnt work?

my link was to a saab 900 one as well but from euro car parts, odd :s

i was being a div and i have some adaptors fitted into mine

Here is a pic


hydraulic slave

David, I doubt you'll find an M12 end for - 03 hose, but you can certainly get a 12mm banjo, is that an alternative? You would obviously also need to find a banjo bolt with the correct thread, I believe thread may be 1.25, 1.5 or 1.75 pitch - certainly at least 2 of those variants are used on VW, Honda & Harley