Board logo

Broken Drive Bearing
MakeEverything - 19/8/09 at 03:01 PM

erm, Oops!
This is why i didnt have any drive on the way to the MOT!

Broken 1
Broken 1


I found this inside the rear O/S Drive hub (Mid Engine Car with Transaxle)

Anyone know where to get a replacement off hand?


blakep82 - 19/8/09 at 03:14 PM

does simplybearings.co.uk (?) have anything? see if you can find the numbers off the side of the bearing and search on there


MakeEverything - 19/8/09 at 03:21 PM

Its the cage i need (salvaged the bearings), but i cant buy the cage without the CV joint!


Bluemoon - 19/8/09 at 03:27 PM

I'd probably replace the joint completely.. Also something amiss for it to breakup like that...

Dan


MakeEverything - 19/8/09 at 03:39 PM

I think it was already broken. This was the first drive out in it for me.

Anyone got a spare CV joint?

Ford Part #: 72CG-4635-BA

Anyone know what this is off?


RickRick - 19/8/09 at 03:41 PM

if it's a sierra one then i might have something of use to you, i've changed a cv joint thinking it was the cause of my knocking problems, but it didn't solve it. it's now in bits, any good to you?


MakeEverything - 19/8/09 at 03:41 PM

They look like these:



mangogrooveworkshop - 19/8/09 at 04:27 PM

mmmm think i may need some


mcerd1 - 19/8/09 at 07:09 PM

just the normal sierra ones ? (i.e. 100mm lobro's not the cossie 108mm ones)

I've got a couple of old CV's left off a 101,000 mile granada if you need one (same joints as the sierra)



I got recon CV's for my dax from the local motorfactors (Pentland), £25+VAT each (but they couldn't do exchange ones, I got my old ones back - or so they tell me)


[Edited on 19/8/09 by mcerd1]

[Edited on 19/8/09 by mcerd1]