The on going saga of my Pinto motor has lead me to buy a running spare so i won't be off the road for long, the spare will be fitted with bits off the current 2.1 heavy breathing, oil spewing rough running dog while i build a third based on the 205 block from a Transit, this will have mostly new bits except for sump, steel light flywheel, carbs and exhuast.

The VR sensor bracket on my current engine is mounted to low so i want to put it in a better position on the Transit block.

Show me your (Megajolt) VR sensor mounting positions gentlemen

mine is mounted in the 4 o'clock position, when looking at the engine from the front

This how I've done mine.


Cheers

Rich

iv done the same as above but my one starts from the altenator holes and comes round and i have a bolt like above has to steady it,il grt a pic tomoz

Mine is almost identical to RichardK's but with a different bracket.

Only pain is changing the alternator belt, but doesnt need doing too often thankfully.

://locostbuilders.co.uk/upload/m_SUC50065.jpg[/img]


vr sensor braket


Description
[Edited on 19/6/09 by jpindy3]

[Edited on 19/6/09 by jpindy3]

paul, come and find me on the rhocar club stand, and i will show you mine ... fnarr fnarr
dave